79
RECOMMENDED SPARE PARTS
It is recommended that certain replacement
parts be stocked for quick availability in the event
that service of your Beck control drive is required.
The types of parts are listed in Table 4, below.
HOW TO ORDER SPARE PARTS
Select the needed parts from the spare parts
list given below. Specify the drive’s model / serial
number (e.g., 11-309-031891-01-02) given on the
nameplate to allow the factory to verify the part
selection. Parts may be ordered by mail, telephone
or fax, with the confirming order sent to the factory
(see back cover).
TABLE 4: RECOMMENDED SPARE PARTS
TABLE 5: MOTORS, CAPACITORS AND RESISTORS
APPENDIX SPARE PARTS
DESCRIPTION PART NO. DESCRIPTION PART NO.
Limit switch assembl
20-3202-10 Control motor See Table 5, below
uxiliar
switch assembl
Motor resistor See Table 5, below
2 switches
20-3202-11
4 switches
20-3202-12 Motor ca
acitor See Table 5, below
Gasket set: DCM Board 22-5012-59
Model 11-159, -169 20-3110-01
Model 11-209, -269 20-3110-02 Fuse, 7A, 125V 11-1373-01
Model 11-309, -369 20-3110-02
Model 11-409, -469 20-3110-03 CPS-2 20-3400-09
USED ON MOTOR CAPACITO
RESISTOR
MODEL NO. PART NO.
OLTAGE HERTZ
MP. PART NO.
ALUE PART NO.
ALUE
11-159/-169
20-2700-20 120 60 .17 14-2840-02 2
f 11-5802-03
500:
50 .17 14-2844-13 3
f 11-5802-03
500:
20-2701-20 120 60 .32 14-2844-11 4
f 11-5802-02
475:
50 .32 14-2840-11 4
f 11-5802-02
475:
11-209/-269
and
11-309/-369
20-2704-21 120 60 .35 14-2844-16 5
f 20-1971-13
220
:*
50 .35 14-2844-19 7
f 20-1971-13
220
:*
20-2705-21 120 60 .56 14-2844-05 8
f 20-1971-12
110
:*
50 .56 14-2844-06 10
20-1971-12
110
:*
11-409/-469
20-2201-31 120 60 1.25 14-2844-17 15
20-1971-03
75:*
50 1.25 14-2844-16 5
f 20-1971-03
75:*
14-2844-17 15
20-2201-32 120 60 2.20 14-2844-15 25
20-1971-04
37.5
*
50 2.20 14-2844-05 8
f 20-1971-04
37.5
*
14-2844-15 25
20-2201-33 120 60 3.00 14-2844-15 25
20-1971-06
18:*
14-2844-09 6
f
50 3.00 14-2844-15 25
20-1971-10
24:*
14-2844-05 8
f
14-2844-09 6
f
*This is a resistor assembly.
