12
Use your television as a computer monitor
If you connect your television to a
computer, as described on page 41,
you can use it as a monitor.
IMPORTANT! If you wish to connect a
computer to the television and use the
television as a monitor, make sure that you
disconnect the television, the computer,
and all equipment connected to the
computer from the mains before you
connect the computer and the television
to each other.
When in use, the computer must be
connected to a grounded wall outlet as
specified in the computer’s setting-up
instructions.
To see the computer picture on the television
screen, you must bring it up with Beo4.
To bring up the computer
picture …
Press repeatedly until PC appears
in the Beo4 display
Press to bring up the picture
You can then operate the
computer as you normally would.
When you have the computer picture on the
screen, you must call up the DVI SETUP menu to
make adjustments to brightness, contrast and
colour.
Picture adjustments …
> Press MENU to bring up the DVI SETUP menu.
> Press
or to move between the menu
options.
> Press
or to adjust settings.
> Press GO to store your settings and exit the
menu.
The settings you make in this menu only apply to
the PC setup.
Bring up the computer image on the screen
