IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using tools such as your air compressor, whether powered by electric
motor or gasoline engine, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury.
READ ALL INSTRUCTIONS BEFORE USING
1. Keep the work area clean. Cluttered areas invite injuries.
2. Consider work area environment. Don’t use sandblaster in damp, wet or poorly lit
locations. Keep work area well lit. Don’t use compressors in the presence of flammable
gases or liquids.
3. Keep children away. All children should be kept away from the work area. Don’t let them
handle tools, hose or extension cords. No one should be in the area of the sandblasting
who does not have the same protective equipment.
4. Dress properly. Wear protective clothing because a dust and abrasive hazard exists. As
a minimum, wear the hood (included), a dust mask to prevent inhaling the material
being removed and heavy duty gloves.
5. Periodically inspect the sand carrying components. There are being sandblasted on the
inside whenever you use the sandblaster and will wear much more rapidly than other
components.
6. Secure the work. Use clamps or a vise to hold the work if it is small or light weight. It’s
safer than using your hand and it frees both hands to operate the nozzle.
7. Don’t overreach. Keep proper footing and balance at all times.
8. Maintain tools with care. Follow instructions for lubricating and changing components
and accessories.
9. Disconnect air compressor power. When not in use or when change components
disconnect the air compressor power.
10. Avoid unintentional starting. Be sure that the nozzle valve is in the off position when not
in use.
11. Stay alert. Don’t operate any machine when you are tired or under the influence of
alcohol or drugs.
12. When servicing use only identical replacement parts.
