www.aleratec.com
6
Disc Repair Procedure
The Disc Repair procedure is used to polish scratches, scrapes, and other
abrasions. It also adds a protective layer to the disc.
Open the top cover by pressing the OPEN button.1.
Remove both of the circular repair heads from the repair 2.
protective kit.
Rotate the repair units in a counterclockwise motion until 3.
secure.
Place 3 drops of the repair protective solution on the side of 4.
the repair head marked “WET”.
Insert the disc (data-side facing downward) and then close 5.
the top cover.
Press the REPAIR button to begin the repairing process, 6.
which lasts approximately two minutes. The machine will
automatically stop when the process is complete.
Press OPEN to remove the disc.7.
Gentlywipethediscwiththeincludedmicroberclothto8.
remove any residue remaining from the repair process.
Check for improvements in the ability to play/read the disc. 9.
Ifthedischasnotbeensufcientlyrecovered,repeatthe
Disc Repair procedure.
