A SERVICE OF

logo

59
| Page © Adam Equipment Company 2009
After the test has finished the user can print either the complete test again or
only a summary by pressing the [Print] key before returning to normal
weighing.
The complete report is a copy of the data as shown above. If the summary
report is selected then the following is printed. Similar to the above except
without the interval readings.
MOISTURE TEST
FILE NAME: RES00032
DATE: 13/12/2008
TIME: 09:38:07
SER NO: XXXXXXXXXXX
USER NO: XXXXXXXXXXX
TEST NO: _ _ _ _ _ _ _ _ _
Preset: PST 05
Bread-4
Result: % Moisture
Heating: Step
Temp: Step 1 120 C
Time 1 04:00
Step 2 110 C
Time 2 90:00
Rapid Manual
Interval: 30 Sec
Stop: Time/Stable
60 Min
0.002 g
30 Sec
Start: Manual
INIT MASS: 12.341 g
*********** AUTO STOP ***********
LAST TEMP: 111C
TEST TIME: 05:30 Min
FINAL MASS: 11.820 g
MASS LOSS: 0.521 g
RESULT: 4.27 %M
Heading
File name used by analyzer to store result
From Analyzer
Add serial number
Add user number
Leave a blank line for users to fill in a number if
they wish, not from Analyzer memory
Settings of the test conditions
Measured initial mass.
TIME STOP if timed out or MAN STOP if user
stopped
Summary of results
Extra LF’s at end of the report