Pumps & Conveying System Components Chapter 1: Safety 7
Conveying System Safety Tags
Spraying Read Operation
Hazard and Installation
Manual
High Voltage Earth Ground
Inside Enclosure
PE Protected Earth
Lifting Point Ground
1-2 Warnings and Precautions
Our equipment is designed to provide safe and reliable operation when installed and operated
within design specifications, following national and local safety codes. This may include, but
is not limited to OSHA, NEC, CSA, SPI, and any other local, national and international
regulations.
To avoid possible personal injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
˛ Read and follow these operation and installation instructions when installing,
operating, and maintaining this equipment. If these instructions become damaged or
unreadable, additional copies are available from the manufacturer.
˛ Follow all SAFETY CODES.
˛ Wear SAFETY GLASSES and WORK GLOVES.
˛ Work only with approved tools and devices.
˛ Disconnect and/or lock out power before servicing or maintaining the equipment.
˛ Use care when LOADING, UNLOADING, RIGGING, or MOVING this
equipment.
˛ Operate this equipment within design specifications.
˛ OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment.
You should remove the fuses and carry them with you.
˛ Make sure the equipment and components are properly GROUNDED before you
switch on power.
˛ Use extreme caution when working with your conveying system. HIGH VACUUM
can be dangerous. Keep body parts, tools, clothing, and debris away from vacuum
inlets.
