30 Configuring PAD/ATPAD Ports
PAD Profile Table Record
#2, Echo
Range: 0, 1
Default: 1
Description: Controls echo:
• 0: Echo disabled
• 1: Echo enabled
Setting to 0 (disabled) causes parameter #20 Echo Mask to be
ignored.
#3, Data Forwarding Character
Range: 0 to 127
Default: 2
Description: Specifies the ASCII characters used for data forwarding:
• 0: No data forwarding characters.
• 1: A-Z, a-z, 0-9.
• 2: <CR>.
•
4: <ESC>, <BEL>, <ENQ>, <ACK>.
• 8: <DEL>, <CAN>, <DC2>.
• 16: <EOT>, <ETX>.
• 32: <HT>, <LF>, <VT>, <FF>.
• 64: All characters in columns 0 and 1 of Appendix A, ASCII
Table, not mentioned above.
Note
Combine several parameter values by summing:
Example
: 6 = 2 (<CR>) + 4 (<ESC>, <BEL>, <ENQ>, and
<ACK>.
This includes all of selection 2 and selection 4.
#4, Idle Timer Delay
Range: 0 to 255
Default: 0
Description: Selects forwarding idle timer delay that determines when data is
sent to the network.
• 1 to 255: Value of idle timer in 1/20 seconds.
• 0: disables the idle timer.
Note
Functional only if parameter #15, Editing, is set to 0.
