Zanussi ZWT 8120 Washer User Manual


 
warnings 5
Warnings
These warnings are for the safety of
you and others around you.
Please read these points carefully
before installing and using your ap-
pliance. Thank you for your atten-
tion.
Keep this user manual with your ap-
pliance. If the appliance is sold or gi-
ven to another person, please make
sure this user manual is included.
This way, the new user will have the
relevant operating instructions and
warnings.
General safety
Do not modify or attempt to modify
this appliance. This would put your-
self in danger.
Ensure that all coins, safety pins,
brooches, screws etc have been
removed before starting a washing
programme. If left in washing, they
can seriously damage the appliance.
Use the amount of detergent recom-
mended in the paragraph “Using the
right amount of detergent”.
Put small items together (socks, belts
etc.) in a small linen bag or pillow
case.
Unplug and close inlet hose tap after
using appliance.
Always disconnect the power supply
from the appliance before cleaning or
maintenance.
Do not machine wash clothes with
ribbing, unfinished or torn material.
Installation
Unpack or ask for the appliance to
be unpacked immediately upon arri-
val. Check the outside of the
appliance is not damaged in any way.
Put any complaints you may have in
writing on your copy of the delivery
receipt.
The appliance must be untied before
connecting to power supply or using.
If all transit packaging is not comple-
tely removed, the appliance or sur-
rounding furniture could be
damaged.
Connection to the water supply must
be carried out by a qualified plumber.
If your domestic electrical circuit
needs adapting to allow the
appliance to be plugged in, use a
qualified electrician.
Ensure that, after installation, the
power cable is not trapped under the
appliance.
If the appliance is installed on carpe-
ted floor, ensure that the carpet does
not obstruct any ventilation ducts
located at the base of the appliance.
The appliance must be equipped
with an earthed power plug which
conforms to regulations.
Before connecting your appliance to
the power supply, carefully read the
instructions in the chapter entitled
“Electrical connection”.
• Replacing the power cable should
only be carried out by the After Sales
Service.
The manufacturer cannot be held
responsible for any damage resulting
from incorrect installation.