Filter
Top Products
Problem Possible cause/Solution
Spinning starts late or the ma-
chine does not spin:
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is redis-
tributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not evenly distrib-
uted in the drum, the machine will not spin. In this case, redistribute
the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select
the spinning programme.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Cen-
tre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Mod
.
..
. ...
..
.
Pro
d. N
o.
... ... ..
S
e
r
.
No
.
... ... ...
Technical data
Dimensions Width
Height
Depth
60 cm
85 cm
44 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
Water supply pressure Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load Cotton 6 kg
Spin Speed Maximum 800 rpm
Consumption values
Programme Energy consumption
(KWh)
Water consumption (li-
tres)
Programme duration
(Minutes)
White Cottons 90° 2.1 62 140
Cottons 60° 1.3 59 130
Cotton ECO 60°
1)
1.02 52 155
15