Zanussi ZWH3125 Washer User Manual


 
38
5. Select the required temperature.
Turn the temperature
selector dial to select the
washing temperature.
Maximum temperatures
are 90°C for cottons,
60°-50°C for synthetic
fabrics and jeans, 40°C
for delicate fabrics, wool
and fabrics to be hand-washed.
By selecting position (Cold) the machine
will wash with cold water. To be used for
extremely delicate items, such as curtains.
6. Select Daily, Quick or SuperQuick option
Press the «Options» button
repeatedly, to select only one of
the available options. The
relevant light will light up.
Press the Options button
repeatedly, to select the
desired option. The relevant
light will light up.
You can select 4 different options:
DIARIO (Daily): to be used for cotton, synthetic
or delicate items of daily use in order to obtain
good washing performance in a short time.
RÁPIDO (Quick): a short cicle for items lightly
soiled.
SUPER RÁPIDO (Extra Quick): a very short
cycle for items that have been used for a short
time or wash at half load.
Diario, Rápido y Super options cannot be
used with the Economy programme 60 Eco
and 40 Eco.
If an option which is not compatible with the
set wash programme is selected, the message
Err is displayed for about 2 seconds and the
red pilot light of the Start/Pause button will
flash 3 times.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red Start/Pause pilot light will
flash 3 times to indicate a wrong selection.
The machine will not perform the new selected
programme.
4. Select the spin speed or No spin or
Rinse Hold option
Press the Spin
button repeatedly
to change the
spin speed, if you
want your laundry
to be spun at a
speed different
from the one
proposed by the
appliance.
The relevant light will light up.
Maximum speeds are:
Cotton and Jeans: 1000 or 1200 rpm
depending on the model;
Synthetic and Handwash: 900 rpm
Delicates: 700 rpm;
No spin : By selecting this option, all
spinning phases are suppresed. On Cotton,
Synthetic and Delicates programmes, the rinses
will be performed with more water.
Rinse Hold: by selecting this option the water
of the last rinse is not emptied out to prevent the
fabrics from creasing. When the programme has
finished the pilot lights «Door» and «End» are
lit, the Start/Pause and «Wash» lights are off
and the door is locked to indicate that the water
must be emptied out..
To empty out the water:
1. turn the programme selector dial to «Off»
2. select the Drain or Spin programme
3. reduce the spin speed if needed, by means
of the relevant button
4. depress Start/Pause button
5. at the end of programme, only the pilot light
End comes on.
126.2936.39…ZWH3105-3125.qxd 24/10/08 09:01 Página 38