Zanussi ZWF 1422 Washer User Manual


 
Remove the power supply cable and the draining
and inlet hose from the hose holders ( C ) on the
rear of the appliance.
Unscrew the three bolts ( A ) and remove the hose
holders ( C ).
Slide out the relevant plastic spacers ( B ).
Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Positioning and levelling
x 4
Level the appliance by raising or lowering the feet.
The appliance MUST be level and stable on a flat
hard floor. If necessary, check the setting with a spirit
level. Any necessary adjustment can be made with a
spanner.
7