Zanussi ZWF 1023 Washer User Manual


 
End
Programme Selector Dial
It allows you to switch the appliance on/off and/or to se-
lect a programme.
Available options:
Spin
By pressing this button you can change the spin speed of
the selected programme or to select Rinse Hold option.
Rinse hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the wa-
ter. To empty out the water, please read the paragraph «At
the end of the programme».
Prewash
By selecting this option the machine performs a prewash
cycle before the main wash phase. The washing time will
be prolonged. This option is recommended for heavily
soiled laundry.
Super Quick
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be
performed. This option is recommended for people who
are allergic to detergents, and in areas where the water is
very soft.
Start Pause
This button allows you to start or to interrupt the selected
programme.
Delay Start
The start of the programme can be delayed by 3, 6 or 9
hours by means of this button.
Indicator pilot light (7)
When selecting a washing programme both lights 7.1
and 7.2 illuminate.
After having pressed the button 5 the only light corre-
sponding to the running phase stays on. The machine
starts working and the door is locked.
The light 7.3 illuminates at the end of the washing cy-
cle. After a few minutes the door can be opened.
If the draining programme is selected any light
will illuminate.
First use
Ensure that the electrical and water connections
comply with the installation instructions.
Remove the polystyrene block and any material
from the drum.
Pour 2 litres of water into the main wash com-
partment
of the detergent drawer in order to
activate the ECO valve. Then run a cotton cycle at
the highest temperature without any laundry in
the machine, to remove any manufacturing resi-
due from the drum and tub. Pour 1/2 a measure
of detergent into the main wash compartment and
start the machine.
28