Zanussi ZWD 16581 W Washer/Dryer User Manual


 
20
After the machine has started, only the running
icon stays on. When the programme has
finished, a flashing zero «
0.00» is displayed.
Delayed start
The selected delay (20 hours max) set by
means of the relevant button appears on the
display for about 3 seconds, then the duration
of the previously selected programme is
displayed.
The delay time value
decreases by one unit
every hour and then,
when 1 hours remain,
the time decreases
every minute.
Incorrect option selection
If an option which is not
compatible with the set
wash programme is
selected, the message
Err is displayed for
about 2 seconds and
the integrated red Start/Pause light start
flashing.
Alarm codes
In the event of
operating problems,
some alarm codes can
be displayed, for
example E20 (see
paragraph «Something
not working»).
E20
2.05
2.05
Drying phase
During the drying phase
the display shows the
drying icon illuminated
and the selected drying
time to indicate that the
appliance has started
the drying phase.
10. Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green
pilot light stops flashing.
The «Lock» light
illuminates to indicate
that the appliance
starts operating and
the door is locked.
The «Lock» pilot light indicates if the door can
be opened:
Light on: the door cannot be opened. The
appliance is in function.
Light off: the door can be opened. The
washing programme is finished.
When the programme has finished, the «Lock»
light goes off.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the Start/Pause
button again.
If you have chosen a delayed start, the
machine will begin the countdown.
Lock
Start/Pause
Operating sequence
132972390.qxd 18/06/2007 14:06 Pagina 20