10
Operating Sequence
WASHING
Before the first wash we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment of the dispenser drawer and start up
the machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment .
If you wish to carry out the prewash or the soak
programme, pour detergent into the appropriate
compartment marked .
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
C0065
C0064
P0004
4. Select the required programme
Turn the programme selector dial to the desired position:
the lights corresponding to the different phases making
up the selected programme light on.
The display shows the duration of the programme.
5. Select the spin speed or the
Rinse Hold option
Press the “Spin Speed” button repeatedly, in order to
select the desired spin speed or the “Rinse Hold” option
. The relevant light will light up.
If you select the “Rinse Hold” option, the machine will
stop at the end of the programme with the water still in
the tub.
6. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
“40° AA” option.
If your laundry needs an extra rinse, select the “Super
Rinse” option. The relevant light illuminates.
40° AA
Prewash Super
Rinse
1400
1200
900
700
Spin
Speed
Prewash
Rinse
Rinse Hold
Drain
Spin
Dry
End
Wash
50°
E60°
50°
Wool
40°
30°
95°
60°
40°
60°
Miniprogramme
Spin
Drain
Softeners
Rinses
Soak
30°
40°
30°
40°
30°
Off
Delicates
Synthetics
Cottons