Filter
Top Products
23
Care and cleaning
• pull out the emergency emptying cap from the
filter cover, using a pliers.
• When no more water comes out,unscrew the
pump cover by turning it anti-clockwise, using
pliers, and remove the filter. Always keep a
rag nearby to dry up any water spillages
when removing the cover. Clean the filter
under a tap, to remove any traces of fluff.
• Remove foreign bodies and fluff from the
pump seat and from the pump impeller.
• Check carefully whether the pump impeller
rotates (it rotates jerkily). If it doesn’t rotate,
please contact your Service Centre.
• Replace the filter into the pump by inserting
it correctly into the special guides. Screw the
pump cover firmly by turning it clockwise.
1
2
1
2
• Replace the emergency emptying cap into
the filter cover and fix it firmly.
• Close the pump door.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged.
It is therefore a good idea to clean it from time
to time.