Zanussi ZWD 1251 W Washer/Dryer User Manual


 
7
Then select a washing programme by means of the
Fabrics” button. If you wish to drain and spin press
the “Skip/Reset” button in order to select the
“Spin” or “Drain” position.
You can select the spin speed by means of the relevant
button and then press press the “Start/Pause” button.
Important!
If you accidentally press the “Skip/Reset” button more
than once, the display will show three blinking dashes.
To cause the washing machine to drain the water, select
any washing programme by means of the “Fabric”
button, then press “Skip/Reset” three times in order to
select the “Drain” position (only the “Drain” light
will remain lit) then press again the “Start/Pause”
button.
The Rinse Hold option cannot be selected for the
automatic WASHING & DRYING programme.
6 “Options” button
Press this button to select the following options:
Prewash: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (not
available for Wool/Handwash programme).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
40° AA: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
The washing temperature will be reduced and the
washing time will be prolonged in order to achieve an
AA class in energy efficiency and washing
performance (not available for Cottons Daily
programme).
• “Quick Wash”: select this option for laundry that is
only slightly soiled (not available for Cottons Daily
and Wool/Handwash programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
The “Prewash”, the “40° AA” and “Quick Wash
options cannot be selected together by means of the
Options” button.
7 “Auto Dry” button
This button allows you to choose the required degree of
drying for cottons and synthetics:
- Extra dry (only for Cottons)
- Store dry (Cottons and Synthetics)
- Iron dry (only for Cottons)
The corresponding pilot light illuminates.
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected degree
of dryness.
8 “Drying Time” button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates. To select “Cottons” you have to push the
button for about 2 seconds. To select the drying time
push the button until the time you want appears in the
display according to the fabrics (Cottons or Synthetics)
you have to dry.
For Cottons and Synthetics you can select a drying
time from 10 minutes to 130 minutes (
2.10).
Every time you press the button the time increases by
5 mins.
9 Display
The following pieces of information are shown on the
display:
Three blinking dashes, when a programme is
cancelled by means of the “Skip/Reset” button.
The three blinking dashes will also appear when you
press the “On/Off” button to switch the machine on, if
the previously selected cycle has been erased.
---