Filter
Top Products
7
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
Washing 4.5 kg of white cotton
at 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and
pour it into the main wash compartment .
If you wish to carry out the prewash, pour detergent
into the compartment marked .
P0006
P0004
3. Measure out the fabric softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Select the required option(s)
Depress SPIN REDUCTION and/or QUICK WASH
and/or RINSE HOLD PLUS button, if required.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme B or A if you wish to perform the prewash.
P0129
B
QUICK
WASH
650 rpm
RINSE
HOLD PLUS
HEAVY
SOIL
P0005