Filter
Top Products
If you open the door during a programme, in order to
restart the programme you must press the Start/Pause
button again after having closed the door. The
icon appears on the display above the relative door
button.
4 SPIN SPEED Button
Press this button repeatedly until the value shown on
the display matches the speed the laundry items were
originally spun in your washing machine.
Depending on the type of laundry the spin speeds are
the following:
- COTTONS: ........800-900-1000-1100-1200-1300
1400 1500-1600 rpm.
- SYNTHETICS: ..800-900-1000 rpm.
- JUMPERS (BABY DRY): 800-900-1000-1100-1200 rpm.
If you do not know the exact laundry spin speed you
can choose blank (no value on the display). The
tumble dryer will dry the laundry using a default
factory drying cycle.
Using this option you could decrease the drying cycle
time, saving energy.
If you have selected a time controlled programme
(60 min. or 30 min.) you could not use this option
because it has been selected a fixed time of drying.
If you try to press this button a warning message
«Selection error» appears in the display.
5 OPTION, CHANGE and
EXIT Buttons
Option button allows you to move through the
option icons.
Change
Options
Exit
Half Power
No
10.55
Door Spin
Change button allows you to select/change the status
of the different icons.
Exit button allows you to return to the previous
selection.
Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before pressing the
START/PAUSE button.
By depressing the «Option» button, all the symbol
icons, allowed for the selected programme, will
appear in the display.
The first option (Half Power) will start flashing.
Its name and status will appear on the display.
If you want to change the option status, press
«Change» button. A line will appear below the
selected icon, indicating that the option is set.
To select the other options press again the «Option»
button and proceed as before.
Once you have completed the selection of the options,
press the «Exit» button, the selected icons will remain
fixed on the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Half Power
Selecting this option allows drying to be performed at
a lower temperature, for delicate items.
The corresponding icon appears on the display
during set up mode and the drying cycle.
A dash is shown under the relative icon to indicate
that the option has been selected.
This option can also be used for time controlled
drying.
This option cannot be selected with Quick Dry .
Change
Options
Exit
Cotton extra
Cycle end at
08.30
10.55
1200
Door Spin
Change
Options
Exit
Half Power
Yes
10.55
Door Spin
6
125981241.qxp 2006-01-04 13:14 Page 6