Filter
Top Products
14
After each use
• Clean the filters (see page 16).
• Empty the water reservoir (see page 17).
Important!
If the drying programme has to be stopped before it
reaches the end, we recommend that you turn the
programme selector dial to position «Cooling» and
wait until the end of this phase before removing the
laundry. This will avoid a build-up of heat inside the
appliance. To do this first turn the dial to «Reset/
Off» and then to «Cooling» and press Start/Pause
button
.
Modifying the programme
To change a programme which is running, first cancel
it by turning the programme selector dial to «Reset/
Off». Select the new programme and press the
Start/Pause button.
125981241.qxp 2006-01-04 13:14 Page 14