Filter
Top Products
6
9. To mount door, see picture B:
■ First locate into upper right hand hole with upper
pin «F».
■ Then place lower pin into the hinge «B» at the bot-
tom of the door.
■ Align door before tightening hinge.
■ Tighten hinge.
10. Remove the plug from hole «d» and refix in
hole«a» (Fig. A).
11. Fix door stopper «A» in hole «c» by 90° rotation.
12. Hook door stopper «A» into hole «d».
B
F
A
C
P0865
c
d
Levelling
Level the tumble dryer
into place by screwing or
unscrewing the feet as
required.
Accurate levelling will
keep vibration and
noise to a minimum
when the dryer is in
use.
P0046
B