Filter
Top Products
14
SERVICING
If, after the above checks, there is still a fault, call
your local Zanussi Service Centre.
Please make sure you give the model and serial
number of the appliance.
This information can be found on the rating plate.
Before contacting your local Zanussi Service Centre, please make the following
checks:
PROBLEM POSSIBLE CAUSE
■
The dryer does not start up
■
The door is open.
■
The plug is not fitted into the wall socket.
■
There is no electricity supply from the wall
socket.
■
The selector dial is not set correctly.
■
The water container is full.
■
The start button has not been depressed.
■
The dryer does not dry properly
■
The filter is clogged.
■
The water container is full.
■
The condenser is clogged.
■
Insufficient drying time.
■
The selected cycle is not suitable for the
laundry.
■
The low temperature function has been
selected in the electronic programme.
■
Excessive laundry load.
■
The dryer is not correctly installed.