Filter
Top Products
13
ENGLISH
Cleaning condenser
Remove fluff from condenser on a regular basis
to avoid prolonging drying times and increasing
energy consumption.
Proceed as follows:
1. Remove condenser by using the top handle.
2. Clean condenser with a hand-held shower or a
soft brush.
3. Clean external part, too.
4. Remove the fluff from the seal of the
condenser in the lower part of the inner door.
5. Leave condenser to dry; when it is dry, place
in original position.
Important! Do not use pointed objects or
utensils to clean the spaces between the plates,
as this could damage the condenser and make it
permeable.
Do not use this appliance if the condenser
has not been fitted.
Emptying water container
Water extracted from the laundry being dried is
collected in a special container. This container
must be emptied after every cycle, but it can also
be emptied during the drying cycle. Should you
forget to empty the container, a light will light up
on the panel and the drying cycle will stop
automatically even if the laundry is not dry yet.
Insert container correctly.
After inserting the container the drying cycle will
resume after 135 secondes max.
Important: When emptying the container during
the drying cycle, the machine stops drying, but
the drying time selector dial will continue to step
on.
0
31
P0827
P0636
P0639