Filter
Top Products
12
The WASHING pilot light illuminates.
The door light comes on to indicate that the door is
locked.
The machine starts operating.
8. At the end
of the programme
The machine stops automatically.
If the Rinse Hold option has been selected, the
phase light END and the DOOR light are on to indicate
that the water must be emptied out before opening the
door.
To do this first turn the programme selector dial to “O”
and then to drain programme or spin programme .
The door can only be opened after the relevant light has
gone out.
Release of the lock is also indicated by the coming on of
the END light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
START
PAUSE
132992330.qxd 4/30/03 2:10 PM Pagina 12 (Nero/Process Black pellicola)