Filter
Top Products
5. Select a load size setting that corre-
sponds with the size of your wash load
and the type of fabric being washed.
See page 16 for loading suggestions.
Your washer has either a slide or rotary
knob Load Size Selector.
l For the slide Load Size Selector,
choose a setting anywhere on or
between the Small and Ex Large
settings.
To change the load size setting, first
slide the Selector to RESET, then to the
desired new setting.
l For a rotary knob Load Size Selector,
turn the Selector to any setting between
Small and Large or Extra Large, de-
pending on the knob settings.
To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed. See
page 17 for water temperature guidelines.
l Your washer has one of the Water Tem-
perature Selectors shown: rotary knob,
pushbutton, or CLEAN TOUCHTM.
l Three wash-rinse temperatures are
available for the rotary knob Selector:
cold-cold, warm-cold, and hot-cold.
l Four wash-rinse temperatures are avail-
able for the CLEAN TOUCH and
pushbutton Selectors: hot-warm,
hot-cold, warm-cold, and cold-cold.
l For all types of Selectors, the top
temperature is the wash water, and the
bottom temperature is the rinse water.
7