Filter
Top Products
Operating Your Washer
1
In This Section
Paas
Pas30
Before starting your w8shsr
-5 ............................. .
Sel Wing a cyck
md time ............................
.18
Starting
or stopping your washsr
.................... .5
Usi ng rinse md spin
......................................
10
Sslscling a load size . . . . . . ..““.........“...................
8
Using drain md spin
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Selecting
wash-rinse tsmperatura
. . . . . . . . . . . . . . . . . . 8
Wh st happens in sach
cycle . . . . . . . . . . . . . . . . . . . . . . . . .
11
Salscting
agitation-spin sm
. . . . . . . . . . . . . . . . . . . . . . . . 7
Operating your washer properly ensures maximum wa thing efficiency. This section gives you
important information to help you to select a cycle, timlr, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted
NOTE: If your washer has a Consumer
load in the washer before starting. See page 14
Fetlture Guide, remove it and place it in your
for additional “Before you wash” information.
USC I and Care Guide.
Starting or stopping your washer
Starting your washer
1. Select a load size and water temperature.
2. Push in and turn the Cycle Control Knob
clockwise. Stop when the indicator on the
knob’s outer ring points to the number in the
wash cycle you want. The numbers are
minutes of wash time.
3. Pull out the Cycle Control Knob.
Refer to pages 6-10 for additional information
to help you make selections.
Stopping and restarting your
washer
l To stop the washer at any time, push in the
Cycle Control Knob.
l To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
5