Filter
Top Products
6
OPERATING YOUR WASHER
Starting your washer
Whether you use your washer’s water-
saving spray-rinse feature, or use it as a
traditional fill-agitation-deep-rinse washer,
the start up procedures are the same.
All of the knobs on your washer’s control
panel, except for the Cycle Control Knob,
function the same regardless of how you
are using your washer. The Cycle Control
Knob must be set for either type of
operation:
• Normal - Water Saving Spray Rinse
(see Step 8)
OR
• Normal - Traditional Deep Rinse
(see Step 8).
1. Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer.
• Sort and load clothes as described on
pages 18 and 19.
• If desired, you may also add color safe
bleach or extra detergent for the Super
Wash cycle.
2. (OPTIONAL STEP) If desired, add
measured liquid chlorine bleach to the
liquid bleach dispenser. See page 16.
• Use only liquid chlorine bleach in the
liquid bleach dispenser.
3. Close the washer lid.
4. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• As shown, your washer has 4 load size
settings.
• To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
Medium
Load Size
Small
Large
Extra
Large
Liquid chlorine
bleach dispenser