9
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efciency detergents. The package
will be marked “HE” or “High Efciency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
HELPFUL TIP: See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers.
4. Add HE detergent to dispenser
5. Add liquid chlorine bleach or Oxi
product to dispenser
Add liquid chlorine bleach or Oxi laundry boost
product to the dispenser. When using Oxi products
or other laundry boosters (liquid or powdered
color-safe bleach), select the Oxi option, press the
Dispensers button until Oxi is selected. It is not necessary to
select the Oxi option when using liquid chlorine bleach.
• Do not overll, dilute, or use more than 3/4 cup (180 mL)
of liquid chlorine bleach. Overlling will cause the bleach
or Oxi product to dispense immediately into the washer.
• Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Detergent dispenser
Liquid chlorine bleach/
Oxi dispenser
6. Add liquid fabric softener to
dispenser
Pour a measured amount of liquid fabric softener
into dispenser; always follow manufacturer’s
directions for correct amount of fabric softener based on
your load size. Then select Fabric Softener option using the
Dispensers button.
IMPORTANT: Fabric Softener option must be selected to
ensure proper distribution at correct time in cycle. Do not
overll or dilute. Overlling dispenser will cause fabric softener
to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
Fabric softener dispenser
Load garments in loose heaps evenly
around the washplate. Do not load
garments directly over the center
of the washplate; when loaded, the
center of the washplate should be
visible. Try mixing different sized
garments to reduce tangling.
IMPORTANT: Garments need to move freely for best cleaning
and to reduce wrinkling and tangling.
3. Load laundry into washer
NOTE: Do not add single-dose laundry packets or fabric softener
crystals to dispensers. They will not dispense correctly.