Filter
Top Products
10
Using Laundry Product Dispensers
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efciency
detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
HELPFUL TIP: See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers. Do not
attempt to remove dispensers.
Detergent
4. Add HE detergent to dispenser
Fabric Softener
7. Add fabric softener to dispenser
Pour a measured amount of liquid fabric
softener into dispenser, always follow
manufacturer’s directions for correct
amount of fabric softener based on your
load size. Then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overll or dilute. Overlling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls in
this washer. They will not dispense correctly.
Bleach
6. Add chlorine bleach or Oxi
product to dispenser
Add chlorine bleach or Oxi laundry boost
product to the dispenser. When using
powdered chlorine bleach or Oxi products,
select the Bleach/Oxi option. It is not
necessary to select the Oxi option when
using liquid chlorine bleach or liquid Oxi products.
• Donotoverll,dilute,orusemorethan3/4 cup (180 mL)
of liquid chlorine bleach. Overlling will cause the bleach
or Oxi product to dispense immediately into the washer.
• Donotusecolor-safebleachorOxiproductsinthesame
cycle with liquid chlorine bleach.
5. Select dispenser options
Touch the Oxi/Fabric Softener button to display the dispenser
options page. Touch the Oxi-Boost and/or Fabric Softener icons
to activate or deactivate each dispenser. When a dispenser is
selected, a check mark will appear in the icon, and the dispenser
name on the button will turn green. Once the desired dispensers
are selected, touch Done to return to the main cycle screen.