Filter
Top Products
2
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Tools needed:
Adjustable or open end
wrench
9
/
16
" (14 mm)
Level
Wood block
Ruler or measuring tape
Pliers that open to 1
9
⁄
16
"
(39.5 mm)
Optional tools:
Flashlight
Bucket
Parts supplied:
NOTE: All parts supplied for installation are in
washer basket.
Beaded Tie Strap
Front leveling feet with
jam nuts (2)
Drain hose form
Parts needed: (Not supplied with washer)
To order, please refer to the phone number or website on back page
of your Washer User Instructions.
n
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
n
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
n
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts: (Not supplied with washer)
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
Washer User Instructions.
If you have: You will need:
Overhead sewer Standard 20 gal. (76 L) 39"
(991 mm) tall drain tub or utility
sink, sump pump, and connectors
(available from local suppliers)
Short drain hose Drain Extension Kit Part Number 49022
1" (25 mm) 2" (51 mm) diameter to 1" (25 mm) diameter
diameter standpipe Standpipe Adapter Kit, Part Number 40923
Connector Kit, Part Number 285835
Lint clogged drain Drain protector, Part Number 376031
Floor drain Siphon Break Kit, Part Number 280129A
Drain Hose, Part Number 285702
Connector Kit, Part Number 285835
Inlet hoses with flat washers
LOCATION REQUIREMENTS
Select proper location for your
washer to improve performance
and minimize noise and possible
“washer walk”. Install your
washer in a basement, laundry
room, closet, or recessed area.
27"
(686 mm)
42"
(1067 mm)
25
1
/2"
(648 mm)
4" min
(102 mm)
Gather required tools and parts before starting installation.