Filter
Top Products
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills to the
selected load size with the selected water
temperature before agitation and timing start.
The washer will begin agitating immediately
after filling; agitation can occur with the washer
lid up or down. After agitation starts, the knob
turns clockwise until it points to OFF and the
cycle ends.
The washer pauses briefly throughout
each
cycle. These pauses are normal for
washer operation.
NOTE:
A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
Regular and Delicate cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
F-l
4
Fill
Rinse
Drain-No agitation
w
Spin-Spray rinse
Permanent Press cycle
Fill to selected load size
Wash selected time
L4
-+- Partial drak$o agitation
Fill to selected load size
Brief agitation
Drain-No agitation
Soin
Fill
Rinse
Drain-No agitation
IstJ
Spin-Spray rinse
Soin