Whirlpool LST7233AG0 Washer User Manual


 
Using the extra rinse option
(on some models)
Some models offer an extra rinse in all cycles.
l Before a cycle starts, select Extra Rinse ON.
The washer automatically adds an extra
rinse and spin to the cycle.
. If no extra rinse and spin is desired, select
Extra Rinse OFF.
NOTE: On CLEAN TOUCH’” models, the “On”
indicator appears when an Extra Rinse is
selected.
Extra rinst
MAGIC CLEAN” lint filter
(on some models)
The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash and
rinse water pass over the filter, separating the
lint from the water. The lint is then spun away
from the filter and out of the system during the
spin part of the cycle.
If your washer drains into a tub, remove any
lint collected in the tub or strainer.
Manual clean lint filter
(on some models)
Clean the filter at the bottom of the agitator
after every load for the best filtering results.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the bottom
of the agitator barrel. The filter is not
removable.
3. Replace the agitator barrel and snap it into
place.
Agitator barrel
Manual clean
lint filter
11