Whirlpool LSW9245EQ0 Washer User Manual


 
The washing portion for this system ends
with a drain and spin the same as do tradi-
tional wash cycles. After that, the spray
rinse system begins.
The washer continues to spin at the
end of the wash cycle. There is no fill.
Fresh water is added as the machine
spins the load. Repeated spinning with
spray rinses achieves excellent rinsing
results and uses less water than does
a traditional rinse cycle.
NOTES: To assure proper spray rinsing:
Do not open the washer lid during
spray rinsing.
Do not use liquid fabric softeners.
You could stain your clothes. Use a
fabric softener sheet in the dryer
instead.
7
OPERATING YOUR WASHER
LOADING
Loading suggestions
For these suggested full-sized loads, set the Load Size selector to the highest load size setting.
SUPER Capacity PLUS Washers
Heavy Work Clothes
3 pair pants
3 shirts
4 pair jeans
1 coverall
1 overall
Towels
10 bath towels
10 hand towels
14 wash cloths
1 bath mat
Mixed Load
3 double sheets
4 pillowcases
8 T-shirts
6 pair shorts
2 shirts
2 blouses
8 handkerchiefs
Delicates
3 camisoles
1 quilted robe
4 slips
4 panties
2 bras
2 nighties
1 baby’s dress
SELECTING A FABRIC SPEED AND CYCLE TIME
This section describes the available wash cycles
and will help you make the best cycle selections
for your wash loads. The Fabric/Speed Select is
used with the Cycle Control knob to design a cycle
to match the fabrics and soil levels in your load.
The washer pauses briefly throughout each cycle.
These pauses are normal. Refer to “Understanding
normal washer sounds” to learn more about the
sounds you may hear during a wash cycle.
Refer to “Understanding what happens in each
cycle” later in this section to learn what happens
during a wash cycle.
THE HIGH EFFICIENCY SPRAY RINSE SYSTEM
Spray rinsing
and spinning
No fill