Filter
Top Products
11
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and
pulled out, the washer fills (to the selected load size)
before agitation and timing start. The washer begins
agitating immediately after filling; agitation occurs
with the washer lid up or down.
During agitation, the XTRA ROLL ACTION
TM
agitator
creates a continuous
rollover action that
provides a thorough
cleaning of the wash
load.
After agitation starts, the Cycle Control knob turns
clockwise until it points to an Off area and the
cycle ends.
NOTE: The washer pauses briefly throughout
each cycle. These pauses are normal for washer
operation.
Sequence of cycles
WASH
RINSE
OPERATING YOUR WASHER
Drain
No agitation
▼
Fill
▼
Wash selected time
▼
Spin
▼
Spin
▼
Continues to spin-No fill
▼
Spray rinses-Spin
▼
Off