Filter
Top Products
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
will drain and spin.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses brlefly throughout oath
cycle. These pauses are normal for washer
operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
WASH
RINSE
M
4
Fill
Wash selected time
Fill
Rinse
Drain (or partial drain’)
No agitation
Drain-No agitation
Spin
NOTE: Wash agitation speed is reduced
during the last few minutes of wash agitation
in the Heavy, Regular, and Permanent Press
cycles.
l3RJ
Spin-Spray rinse
Spin
9