Filter
Top Products
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size with the selected water
temperature) before agitation and timing start.
The washer will begin agitating immediately
after filling; agitation can occur with the washer
lid up or down. After agitation starts, the knob
turns clockwise until it points to OFF and the
cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
Permanent Press cycle
Regular and Short cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
M
4
Fill
w
Rinse
Drain-No agitation
Spin
Fill to selected load size
Wash selected time
u
-+- Partial drain&o agitation
Fill to selected load size
Brief agitation
Drain-No agitation
Fill
Rinse
Drain-No agitation
Spin
w
9