Whirlpool RAC4244A Washer User Manual


 
Select a cycle and wash
l
Push in the Cycle Control Knob and turn it
clockwise.
l
Stop when the indicator on the knob’s outer ring
points to the number in the wash cycle you
want. The numbers are minutes of wash time.
Starting/stopping your washer
l
Start the washer by pulling out the Cycle
Control Knob. The washer will fill to the
selected water level with the selected wash
water temperature. The washer will begin
agitating immediately after filling. Agitation can
occur with the washer lid up or down.
l
To stop the washer at any time, push in the
Cycle Control Knob. To restart the washer, pull
out the Cycle Control Knob.
What happens in each
cycle
Each cycle is designed for different kinds of
fabrics.
When the Cycle Control Knob is set to a
number and pulled out, the washer fills before
agitation and timing starts. After agitation starts,
the knob turns clockwise until it points to OFF
and the cycle ends.
The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
Regular cycle
Regular/Heavy Soil-cleans sturdily constructed
fabrics and heavily soiled loads.
Wash time: 14 minutes
Regular/Normal Soil-cleans regular loads of
fabrics that are moderately soiled.
Wash time: 10 minutes
The Regular cycle uses a longer spin to shorten
drying times.