Filter
Top Products
4-13
11. To remove the belt and drum:
a) Grasp the sides, lift, and pull the front
panel forward so that the top screws
are free of the keyhole slots. Lower the
panel so that the drum sits on the com-
ponents inside the cabinet, and slide
the front panel and rollers away from
the drum.
c) Lift the drum and remove it from the
unit.
b) Slide the belt off the drum.
Belt
REASSEMBLY NOTE: Use the following illus-
tration as a guide when installing a new belt.
Continued on the next page.
Drive Motor Pulley
Drum
Idler
Pulley
Keyhole Slot