Filter
Top Products
2-1
123456654172 12348941723
4
G
ather the required tools and parts before starting installation.
R
ead and follow the instructions provided with any tools listed
h
ere.
R
emove parts packages from dryer drum. Check that all parts are
i
ncluded.
Do not use leveling legs if installing the dryer on a
p
edestal.
C
heck local codes. Check existing electrical supply and venting.
S
ee “Electrical Requirements” and “Venting Requirements”
b
efore purchasing parts.
For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see Plan Vent System section for
venting requirements.
M
obile home installations require metal exhaust system hardware
a
vailable for purchase from the dealer from whom you purchased
y
our dryer. For further information, please refer to the Assistance
or Service
section of this manual.
7
Are you placing the dryer on a pedestal? You have the option of
purchasing a pedestal separately for this dryer. You may select a
15.5" (39.4 cm) pedestal. This pedestal will add to the total height
of the dryer for a total height of approximately 53.5" (135.9 cm).
For a garage installation, you will need to place the pedestal at
least 3.5" (8.9 cm) above the floor.
To order, call the dealer from whom you purchased your dryer or
refer to the Assistance or Service section of this manual.
3
Are you planning to stack your washer and dryer? To do so, you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the Assistance or Service section of this manual. Ask
for Part Number 8541503.
Flat-blade screwdriver
#2 Phillips screwdriver
Adjustable wrench that
opens to 1" (2.5 cm) or
hex-head socket wrench
(for adjusting dryer feet)
Wire stripper (direct wire
installations)
Level
Vent clamps
Caulking gun and
compound (for installing
new exhaust vent)
Tin snips (new vent
installations)
¼" nut driver
(recommended)
Tape measure
White WHP1500SQ
Black WHP1500SB