Whirlpool LT5000XS Washer/Dryer User Manual


 
Lint screen
Clean the lint screen before each load. A screen blocked by lint
can increase drying time and may be a FIRE HAZARD.
The lint screen is
inside the dryer
drum, on the-
back wall.
1. Use the finger
holes to pull
the lint screen
. . . .
srralgnr OUT.
2. Lightly
squeeze the
body, as
shown, while
pulling the
cover off.
3. Roll lint off the
screen with
your fingers.
DO NOT rinse
or wash the
Squeeze body ;
pull cover off.
screen. Wet lint is hard to remove,
4. Replace the cover on the body of
the lint screen.
5. Push the lint screen straight back
in until it clicks into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage.
Heat Element Terminals
ELECTRIC DRYERS
Box
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
0
l Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l Avoid InJury or damage - do not
put hands inside cabinet.
l Make sure dryer is cool.
1. Remove back panel from dryer.
2. Avoid touching wires and
thermostats.
3. Remove lint from shaded area -
see art- with a soft brush or
vacuum cleaner.
4. Replace back panel, reconnect
and relevel the washer/dryer.
17