Filter
Top Products
Other operating instructions
For a rinse and spin
For a drain and spin
You may need an extra rinse and
spin for heavily soiled loads which
need more detergent. (Extra
detergent can require an extra rinse.)
1. Push Control Knob in.
2. Turn clockwise to any l on the
dial. See above drawing.
3. Pull Control Knob out. The washer
will fill to selected level; agitate 2
minutes; drain and spin.
Your washer can be set to drain
and spin out water.
1. Push Control Knob in.
2. Turn clockwise to the bar just
before the OFF area in any cycle.
See above drawing.
3. Pull Control Knob out. The washer
will drain and spin.
For agltatlon and spin speeds In each cycle, see pages S-11.
For a soak or pre-wash
For best results, use warm water
for soaking or prewashing stained
laundry. Hot water can set stalns.
1. Use recommended amount of
detergent or
pre-soa k
product.
2. Push Control Knob in.
3. Turn clockwise to point at a
number in the SOAK or PRE-
WASH Cycle.
4. Pull Control Knob out. The washer
will start.
5. When the cycle is over, add de-
tergent for the next selected wash
cycle. The SOAK Cycle should
always be followed by a Wash
Cycle.
Important: See addlftonal care
lnformatlon In your “Laundry
Guide!’
To start the soak or pm-wash with agitation, the Cycle Control
Knob must point to a number.
12