Filter
Top Products
Starting your washer
Before starting your washer, be sure you have measured and added
detergent, and have put in a properly sorted load as recommended in
Your “Laundry Guide:’
Position
1. SELECTOR SWITCH
l
Move Selector Switch to WASHER
position. Washer will not operate
when switch is in DRYER position.
Select WATER
3.
TEMPERATURES
*Match the wash water temperature
to the type of fabrics and soils being
washed.
Recommended wash temperatures
can be found in your “Laundry Guide:’
6
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
The water level can be set for EX
SMALL, MEDIUM or LARGE loads.
Select the water level that
matches the load size.
See your “Laundry Guide” for details
on load sizes.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can tear items.
‘Approx~mole 1111 wth load