Operating Your Washer
I- ~ ~
In This Section
Before starting
your washer
I5
.............................
Starting or stopping your washer
.....................
5
Selecting
a load size
.........................................
.5
Selecting
wash-rinse temperatures
................
.6
Page
Selecting a cycle and
time
.............................
.6
Using rinse and spin ......................................
.8
Using drain and spin ......................................
.8
What happens in each
cycle
..........................
.9
Operating your washer properly assures maximum washing efficiency. This section gives you
important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a
sorted load in the washer before starting.
See page 12 for additional “Before you wash”
information.
NOTE:
If your washer has a Consumer Buy
Guide, remove it and place it with your Use
and Care Guide.
Starting or stopping your washer
Starting your washer:
l To restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.
Selecting a load size
Position the Load Size Selector at the setting
that corresponds to the size load you want to
wash.
Select a load size based upon the size of
the load and the fabric you are washing. See
page 12 for additional loading information.
To change the load size setting after the
washer has started to fill, move the Selector to
the desired new setting.
5