Filter
Top Products
Other Operating Instructions
Extra rinse option
For an automatic extra rinse in the
REGULAR Cycles:
l
Touch the Extra Rinse ON pad before
a REGULAR Cycle starts. The ON
indicator will show. The washer will
automatically proceed into the extra
rinse and spin after the REGULAR
Cycle.
l
If no extra rinse and spin is wanted in
a REGULAR Cycle, touch the Extra
Rinse OFF pad. Make sure the OFF
indicator is showing. If extra rinse is
not selected, the Cycle Control Knob
will stop at the orange line before
EXTRA RINSE OPTION when the
REGULAR Cycle is completed.
For an extra rinse in other cycles, see
“Rinse and spin.”
Rinse and spin
You may need an extra rinse and spin
for heavily soiled loads which have had
extra detergent added for proper
cleaning.
1. Push Cycle Control Knob in.
2. Turn clockwise to any dot on the dial.
3. Pull Cycle Control Knob out. The
washer will fill to selected level,
agitate 2-4 minutes, drain and spin.
Drain and spin
Your washer can be set to drain and
spin out water.
1.
2.
3.
Push Cycle Control Knob in.
Turn clockwise to the bar just before
the OFF area in any cycle. See
drawing.
Pull Cycle Control Knob out. The
washer will drain and spin.
IO