Filter
Top Products
Drying times
Mixed loads
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen.
l
dryer temperature selection.
See Paqe 6 in Your “Drver Guide”
for more informaiion.
End-of-cycle signal
3
P
‘/
/?
\’
\
The dryer will beep 5 times to let you know
when the cycle is finished. It will also beep after
each FINISH GUARD tumbling. The signal cannot
be turned off and is not adjustable.
The signal is helpful when you ore drying per-
manent press, synthetics and other items that
should be taken out as soon as the dryer stops.
When drying a load with different
kinds and weights of fabrics, use the
setting suggested for the lightest
fabrics.
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on page 10.