Filter
Top Products
I
Turn
Touch FABRIC-TEMP
. power on
2.
Selector
Move the POWER SWITCH up.
You will have 8 seconds to touch
a FABRIC-TEMP Selector.
Within 8 seconds, touch the lower
part of a FABRIC-TEMP Selector. The
dryer will not operate if you touch the
upper half of the selector.
You may change the dryer setting
at any time dunng any cycle by
touching the desired selector or
selectors.
Touch a CUSTOM DRY
3. or TIMED DRY Control
IMPORTANT: If you do not touch a
CUSTOM DRY or TIMED DRY Control,
the dryer will automatically select
NORMAL DRY.
If this is not the dryness you.like,
you must touch one of the other
dryness Controls. See page 6 of this
book for more details.
4
l
To stop the dryer
1.
Open the door, or...
2. Move POWER SWITCH to OFF.
l
To check the load
1.
Open door.
2. The dryer will remember where it
was in the cycle it you restart the
dryer within 2 minutes. Touch
selector with the blinking light to
restart.