Filter
Top Products
FINISH GUARD”Contro1
FINISH GUARD takes
The indicator light will stay on as
over automatically
long as FINISH GUARD is tumbling the
when the cycle
is load. Remember that FlNISH GUARD
is selected automatically every
time you use the
dryer.
It tumbles the load, without heat,
every 5 minutes for up to 21% hours.
This rearranges and fluffs the load to
help prevent wrinkles that set in
when a load remains in a warm dryer,
Drying tips
FLUFF AIR Setting
TUMBLE PRESS Control
-
B
FLUFF AIR gives you 20
minutes of tumbling
without heat. FINISH
fluff
air
GUARD is automatically
selected with this cycle.
cases or closets.
If you do not want FINISH GUARD
you must cancel it by touching it. The
light will go out.
This setting can be used to fluff
bedding, pillows and clothing or to
dust drapes. It can also be used
to damp-dry heat sensitive items..
such as plastic shower curtains,
rubber-backed rugs, plastic table-
cloths, foam rubber pillows, stuffed
toys, sneakers, etc.
If you want more than 23 minutes
of tumbling, touch the FLUFF AIR and
the TIMED DRY Control for the
amount of time you want (up to 80
minutes).
TUMBLE PRESS gives you 15 minutes
of tumbling at the medium fabric
temperature and 5 more minutes of
tumbling without heat. FINISH
GUARD is automatically selected
with this cycle.
For best results, TUMBLE PRESS only
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
Drying times
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen.
0 dryer temperature selection.
See page 6 in your “Dryer Guide”
for more information.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
setting suggested for the lightest
fabrics.
7