Filter
Top Products
Set TEMPERATURE
2.
SELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
Push the
3. START Button
The dryer will start tumbling when you
push the START button.
If the START button is pushed when
the control knob is pointing to an OFF
area, the End-of-Cycle Signal will
sound. Dryer will not start.
The Cycle Control Knob should polnt
Turn the Temperature Selector to the
needed drying temperature
To stop and restart
the dryer
To stop
the dryer, open the door [or
turn the Control Knob to OFF).
To
restart
the dryer, close the door,
select cycle, if necessary, and push
START.
to OFF when the dryer Is not in use.
5