Filter
Top Products
Drying tips
Drying times
Mixed loads
Drying times will vary depending on:
l
amount of moisture in the clothes,
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the dryer.
l
temperature of the wash rinse water.
l
amount of lint in the lint screen.
l
dryer temperature selection.
See your “Dryer Guide” for
more information.
End-of-cycle signal
3
‘/
P-
’ ,\’
m
When drying a load with different
kinds and weights of fabrics, use the
setting suggested for the lightest
fabrics.
The dryer will beep 8 times to let you know
when the cycle is finished. It will also beep after
each FINISH GUARD tumbling. The signal can
be turned off, but the volume is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items
that should be taken out as soon as the dryer
stops.
I
1
a
&
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
w
shown on page 10.