Filter
Top Products
Your automatic uasher IS easy to
use. To make it even easle’ read the
following steps before starting your first
ioad
Start your washer after you put In
detergent, the load, and any other
laundry aids occordlng to InformatIon
on page 3
1. Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load See page 5 for
more ~nformatior:
IMPORTANT For the best cleaning
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash water temperature to
the type of fabrics and soils being
washed All rinses are cold
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn It tothe right (clockwise)
l
Stop when the pointer is on thenum~
ber of minutes of washing you want
in the cycle you want.
l
Instructions for which cycles to use for
each fabric type are under the ltd.
l
To start the washer, pull the Cycle
Control Knob out. When the cycle
IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull It out to restart the washer
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwlse)
to the setting you want Pull the knob
out to start the washer
l
Pages a- 11 show what happens In
each cycle