Filter
Top Products
/ Select a
3. FABRIC selector
A.
Other selections. lf you want a
cycle other than REG/ HEAVY, touch
a different FABRIC selector within 8
seconds after turning on POWER
SWITCH.
B.
For more time. Touch HOLD if
You want more time to decide on
another selection.
l
HOLD will stop the washer while
you make another selection. Then
push RUN.
C.
If an Indicator Light does
not glow after a Selector is
touched:
l
The Selector was not touched on
the lower half. Only touch Selec-
tors in lower area beneath light.
l
The Selector was not touched
before the 8 second selection
time ran out.
l
The option you chose can’t be
combined with the FABRIC selec-
tion. See pages 6 and 7.
D.
Changing a Selection. Before
the washer starts, touch another
selector. This cancels the selection
You don’t want.
If the washer has started, move the
POWER SWITCH to OFF.
l
Then start back at Step 1 on
page 4.